4 Reasons Your Whirlpool Washer is Leaving Your Clothes Wet When Complete

If you have a Whirlpool washer, chances are you've experienced the issue of it not completing the final spin cycle. This can be incredibly annoying and cause a lot of frustration. But don't despair! With some troubleshooting, you can easily figure out why your washer won't complete the final spin cycle and get back to doing your laundry in no time. Let's take a look at four common reasons why this might happen. 

The Lid Switch is Faulty or Misaligned 

Most modern washing machines come with an interlock lid switch that prevents the machine from spinning when the lid is open. If this switch is misaligned or loose, then it won't make contact with the lid and will prevent the machine from spinning. To check if this is what's causing your issue, simply open up the top of your washer and use a small screwdriver to adjust or tighten the switch until it makes contact with the lid. 

The Door Lock Is Malfunctioning 

If you have a front-loading washing machine, then there may be an issue with its door lock mechanism. This locking mechanism prevents water from coming out of the machine when it's in operation and also helps keep clothes from getting stuck inside during a spin cycle. If this lock is malfunctioning or jammed, then it will prevent your washer from continuing its cycle. To resolve this issue, try cleaning out any debris that might be blocking the door lock mechanism or check for any loose wires that could be preventing it from working properly. 

The Motor Is Overloaded 

If your washing machine has become overloaded (that is, if it's been filled with too many clothes) then it can cause an overload on its motor as well as strain on other parts of its system like its belt or pulley system. When this happens, your washer may stop mid-cycle and refuse to complete its spin cycle until some of its load has been removed - so make sure to check how full your washer is before running another cycle! 

The Belt Is Broken Or Worn Out  

The belt in your washer helps keep all its moving parts in sync and allows them to work together efficiently during a wash cycle. If this belt has become worn out over time due to normal wear and tear then it may need to be replaced in order for your washer to work properly again - so keep an eye out for any signs that yours needs replacing! 

Conclusion:

A Whirlpool washer not completing its final spin cycle can be incredibly frustrating - but luckily there are some easy troubleshooting steps you can take in order to figure out what’s wrong and get back to doing laundry without delay. From checking if there’s anything blocking its door lock mechanism to inspecting whether or not its belt needs replacing; these tips should help guide you towards figuring out why your Whirlpool wasn’t finishing up that last spin cycle!